Contitech Tumble Dryer Belt 1578 H5 - Replacement Drive Belt For Various Dryer Brands

About This Product

Is your tumble dryer making a slapping noise or not turning the drum?

Chances are the drive belt is worn out or broken.

This Contitech replacement belt is a super common size: 1578 mm long (that's the length when it's stretched out), with a ribbed design and 5 teeth (that's the H5 part).

It's 4 channels wide, and the teeth are 2.5 mm high.

This belt fits a ton of dryer brands—think Hotpoint, Creda, Indesit, White Westinghouse, Brandt, Fagor, ASPES, KPL, and many more.

Its job is simple: it wraps around the motor pulley and the drum, transferring the motor's spin to turn the drum.

No belt, no tumbling!

Installation is a bit of a DIY job.

You'll need to get inside your dryer (make sure it's unplugged first!).

Typically, you loop the belt around the motor pulley, then stretch it around the drum.

Some dryers have an idler pulley or tensioner you need to route it through.

There's a basic guide included, but if you're not comfortable, maybe get a repair person to help.

The belt is made from durable rubber/composite material.

Keep in mind this is just the belt—you might need other parts if the tensioner or pulley is also broken.

But if you've confirmed your old belt is 1578 mm with 5 teeth, this should be the right one.

Product Information